SIP User's Manual 88 Document #: LTRT-65415
MediaPack Series
3.3.2.1.4.3 Configuring the Internal SRV Table
The 'Internal SRV Table' page resolves host names to DNS A-Records. Three different A-
Records can be assigned to each host name. Each A-Record contains the host name,
priority, weight, and port.
Notes:
• If the Internal SRV table is configured, the device initially attempts to
resolve a domain name using this table. If the domain name isn't found,
the device performs an Service Record (SRV) resolution using an
external DNS server (defined in ''Configuring DNS Settings'' on page 86).
• You can also configure the Internal SRV table using the ini file table
parameter SRV2IP (see ''DNS Parameters'' on page 342).
¾ To configure the Internal SRV table:
1. Open the 'Internal SRV Table' page (Configuration tab > VoIP menu > Network
submenu > DNS submenu > Internal SRV Table).
Figure 3-55: Internal SRV Table Page
2. In the 'Domain Name' field, enter the host name to be translated. You can enter a
string of up to 31 characters.
3. From the 'Transport Type' drop-down list, select a transport type.
4. In the 'DNS Name 1' field, enter the first DNS A-Record to which the host name is
translated.
5. In the 'Priority', 'Weight' and 'Port' fields, enter the relevant values
6. Repeat steps 4 through 5, for the second and third DNS names, if required.
7. Repeat steps 2 through 6, for each entry.
8. Click the Submit button to save your changes.
9. To save the changes so they are available after a hardware reset or power fail, see
''Saving Configuration'' on page 169.
To Next Page
Loading...
Need help?
General
