Version 6.2 137 February 2011
SIP User's Manual 3. Web-Based Management
3.3.2.8.3 Routing
The Routing submenu allows you to configure call routing rules. This submenu includes
the following page items:
îš„ General Parameters (see ''Configuring General Routing Parameters'' on page 137)
îš„ Tel to IP Routing (see ''
Configuring Tel to IP Routing'' on page 138)
îš„ IP to Trunk G
roup Routing (see ''Configuring IP to Hunt Group Routing Table'' on page
142)
îš„ Alternative Routing Rea
sons (see ''Configuring Alternative Routing Reasons'' on page
144)
îš„ Forward on B
usy Trunk (see ''Configuring Call Forward upon Busy Trunk'' on page
146)
3.3.2.8.3.1 Configuring General Routing Parameters
The 'Routing General Parameters' page allows you to configure general routing
parameters. For a description of these parameters, see ''Configuration Parameters
Reference'' on page 333.
¾ To configure general routing parameters:
1. Open the 'Routing General Parameters' page (Configuration tab > VoIP menu > GW
and IP to IP submenu > Routing submenu > General Parameters).
Figure 3-85: Routing General Parameters Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
To Next Page
Loading...
Need help?
General
