SIP User's Manual 246 Document #: LTRT-65415
MediaPack Series
Figure 8-13: FXO Automatic Dialing Configuration
3. In the ‘Tel to IP Routing’ page, enter 10 in the ‘Destination Phone Prefix’ field, and the
IP address of the FXS device (10.1.10.3) in the field ‘IP Address’.
Figure 8-14: FXO Tel-to-IP Routing Configuration
4. In the ‘FXO Settings’ page (see ''Configuring FXO Parameters'' on page 152), s
et the
parameter ‘Dialing Mode’ to ‘Two Stages’ (IsTwoStageDial = 1).