SIP User's Manual 370 Document #: LTRT-65415
MediaPack Series
Parameter Description
 For a detailed description of all the parameters included in this ini
file table parameter and for configuring Media Realms using the
Web interface, see Configuring Media Realms.
 For a description on configuring ini file table parameters, see
''Configuring ini File Table Parameters'' on page 194.
10.8 Control Network Parameters
10.8.1 IP Group, Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 10-28: Proxy, Registration and Authentication SIP Parameters
Parameter Description
Web: IP Group Table
EMS: Endpoints > IP Group
[IPGroup]
This ini file table parameter configures the IP Group table. The
format of this parameter is as follows:
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode,
IPGroup_SRD, IPGroup_MediaRealm,
IPGroup_ClassifyByProxySet, IPGroup_ProfileId,
IPGroup_MaxNumOfRegUsers, IPGroup_InboundManSet,
IPGroup_OutboundManSet, IPGroup_ContactName;
[\IPGroup]
For example:
IPGroup 1 = 0, "dol gateway", 1, firstIPgroup, , 0, -1, 0, 0, -1, 0,
1, 1,;
IPGroup 2 = 0, "abc server", 2, secondIPgroup, , 0, -1, 0, 0, -1,
0, 1, 2,0;
IPGroup 3 = 1, "IP phones", 1, thirdIPGroup, , 0, -1, 0, 0, -1, 0,
, 1, 2, ;
Notes:
 For this parameter to take effect, a device reset is required.
 This table parameter can include up to 9 indices (where 1 is
the first index).
 The parameters Type, EnableSurvivability, ServingIPGroup,
RoutingMode, SRD, MediaRealm, ClassifyByProxySet,
MaxNumOfRegUsers, InboundManSet, OutboundManSet
are not applicable.
 For a detailed description of the ini file table's parameters
and for configuring this table using the Web interface, see
''Configuring IP Groups'' on page 103.
 For an explanation on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 194.
To Next Page
Loading...
Need help?
General
