SIP User's Manual 170 Document #: LTRT-65415
MediaPack Series
3.4.2 Software Update
The Software Update menu allows you to upgrade the device's software, install Software
Upgrade Key, and load/save configuration file. This menu includes the following page
items:
îš„ Load Auxiliary Files (see ''Loading Auxiliary Files'' on page 170)
îš„ Software
Upgrade Key (see ''Loading Software Upgrade Key'' on page 172)
îš„ Software
Upgrade Wizard (see ''Software Upgrade Wizard'' on page 175)
îš„ Config
uration File (see ''Backing Up and Loading Configuration File'' on page 178)
3.4.2.1 Loading Auxiliary Files
The 'Load Auxiliary Files' page allows you to load various auxiliary files to the device.
These auxiliary files are briefly described in the table below:
Table 3-28: Auxiliary Files Descriptions
File Description
INI
Provisions the device’s parameters. The Web interface enables practically full
device provisioning, but customers may occasionally require new feature
configuration parameters in which case this file is loaded.
Note: Loading this file only provisions those parameters that are included in the
ini file. For a detailed description on the ini file, see ''INI File-Based
Management'' on page 193.
Call Progress
Tones
This is a region-specific, telephone exchange-dependent file that contains the
Call Progress Tones (CPT) levels and frequencies for the device. The default
CPT file is U.S.A. For a detailed description of the CPT file, see ''Call Progress
Tones File'' on page 217.
Prerecorded
Tones
The Prerecorded Tones (PRT) file enhances the device's capabilities of playing a
wide range of telephone exchange tones that cannot be defined in the CPT file.
For a detailed description of the PRT file, see ''Prerecorded Tones File'' on page
222.
Dial Plan
This file contains dialing plans, used by the device, for example, to know when to
stop collecting the dialed digits and start sending them on. For a detailed
description of the Dial Plan file, see Dial Plan File on page 223.
User Info
The User Information file maps PBX extensions to IP numbers. This file can be
used to represent PBX extensions as IP phones in the global 'IP world'. For a
detailed description of the User Info file, see ''User Information File'' on page
224.
To Next Page
Loading...
Need help?
General
