SIP User's Manual 168 Document #: LTRT-65415
MediaPack Series
3.4.1.1.2 Locking and Unlocking the Device
The Lock and Unlock options allow you to lock the device so that it doesn't accept any new
calls. This is useful when, for example, you are uploading new software files to the device
and you don't want any traffic to interfere with the process.
¾ To lock the device:
1. Open the 'Maintenance Actions' page (see ''Maintenance Actions'' on page 166).
2. Und
er the 'LOCK / UNLOCK' group, from the 'Graceful Option' drop-down list, select
one of the following options:
• 'Yes': The device is 'locked' only after the user-defined time in the 'Lock Timeout'
field (see Step 3) expires or no more active traffic exists (the earliest thereof). In
addition, no new traffic is accepted.
• 'No': The device is 'locked' regardless of traffic. Any existing traffic is terminated
immediately.
Note: These options are only available if the current status of the device is in the
Unlock state.
3. In the 'Lock Timeout' field (relevant only if the parameter 'Graceful Option' in the
previous step is set to 'Yes'), enter the time (in seconds) after which the device locks.
Note that if no traffic exists and the time has not yet expired, the device locks.
4. Click the LOCK button; a confirmation message box appears requesting you to
confirm device Lock.
Figure 3-105: Device Lock Confirmation Message Box
5. Click OK to confirm device Lock; if 'Graceful Option' is set to 'Yes', the lock is delayed
and a screen displaying the number of remaining calls and time is displayed.
Otherwise, the lock process begins immediately. The 'Current Admin State' field
displays the current state: LOCKED or UNLOCKED.
¾ To unlock the device:
1. Open the 'Maintenance Actions' page (see ''Maintenance Actions'' on page 166).
2. U
nder the 'LOCK / UNLOCK' group, click the UNLOCK button. Unlock starts
immediately and the device accepts new incoming calls.
Note: The Home page's General Information pane displays whether the device is
locked or unlocked (see ''Using the Home Page'' on page 53).
To Next Page
Loading...
Need help?
General
