Version 6.2 35 February 2011
SIP User's Manual 3. Web-Based Management
3.1.6 Working with Configuration Pages
The configuration pages contain the parameters for configuring the device. The
configuration pages are displayed in the Work pane, which is located to the right of the
Navigation pane.
3.1.6.1 Accessing Pages
The configuration pages are accessed by clicking the required page item in the Navigation
tree.
¾ To open a configuration page in the Work pane:
1. On the Navigation bar, click the required tab:
• Configuration (see ''Configuration Tab'' on page 57)
• Ma
intenance (see ''Maintenance Tab'' on page 166)
• Statu
s & Diagnostics (see ''Status & Diagnostics Tab'' on page 180)
The men
us of the selected tab appear in the Navigation tree.
2. In the Navigation tree, drill-down to the required page item; the page opens in the
Work pane.
You can also access previously opened pages, by clicking your Web browser's Back
button until you have reached the required page. This is useful if you want to view pages in
which you have performed configurations in the current Web session.
Notes:
• You can also access certain pages from the Device Actions button
located on the toolbar (see ''Toolbar'' on page 31).
• To view all the menus in the Navigation tree, ensure that the Navigation
tree is in 'Full' view (see ''Displaying Navigation Tree in Basic and Full
View'' on page 33).
• To get Online Help for the currently displayed page, see ''Getting Help''
on page 51.
• Certain pages may not be accessible or may be read-only if your Web
user account's access level is low (see ''Configuring the Web User
Accounts'' on page 66). If a page is read-only, 'Read-Only Mode' is
displayed at the bottom of the page.
3.1.6.2 Viewing Parameters
For convenience, some pages allow you to view a reduced or expanded display of
parameters. A reduced display allows you to easily identify required parameters, enabling
you to quickly configure your device.
The Web interface provides you with two methods for handling the display of page
parameters:
îš„ Display of "basic" and "advanced" parameters (see ''Displaying Basic and Advanced
Parameters'' on page 36)
îš„ Display of parameter g
roups (see ''Showing / Hiding Parameter Groups'' on page 37)
To Next Page
Loading...
Need help?
General
