Version 6.2 147 February 2011
SIP User's Manual 3. Web-Based Management
3.3.2.8.4 DTMF and Supplementary
The DTMF and Supplementary submenu allows you to configure DTMF and
supplementary parameters. This submenu includes the following page items:
îš„ DTMF & Dialing (see ''Configuring DTMF and Dialing'' on page 147)
îš„ Supplem
entary Services (see ''Configuring Supplementary Services'' on page 148)
3.3.2.8.4.1 Configuring DTMF and Dialing
The 'DTMF & Dialing' page is used to configure parameters associated with dual-tone
multi-frequency (DTMF) and dialing. For a description of the parameters appearing on this
page, see ''Configuration Parameters Reference'' on page 333.
¾ To configure the DTMF and dialing parameters:
1. Open the 'DTMF & Dialing' page (Configuration tab > VoIP menu > GW and IP to IP
submenu > DTMF & Supplementary submenu > DTMF & Dialing).
Figure 3-90: DTMF & Dialing Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
To Next Page
Loading...
Need help?
General
