Version 6.2 193 February 2011
SIP User's Manual 4. INI File-Based Management
4 INI File-Based Management
The device can also be configured by loading an ini file, which contains user-defined
parameters. The ini file can be loaded to the device using the following methods:
îš„ Web interface (see ''Backing Up and Loading Configuration File'' on page 178)
îš„ AudioCode
s' BootP/TFTP utility (refer to the Product Reference Manual)
îš„ Any standard TFTP server
The ini file configuration parameters are saved in the device's non-volatile memory when
the file is loaded to the device. If a parameter is excluded from the loaded ini file, the
following occurs depending on how you load the file:
îš„ 'Load Auxiliary Files' page (see ''Loading Auxiliary Files'' on page 170): current
setting
s are retained for excluded parameters
îš„ All other methods: default value is assigned to excluded parameters (according to the
cmp file running on the device), thereby, overriding values previously defined for these
parameters
Notes:
• For a list and description of the ini file parameters, see ''Configuration
Parameters Reference'' on page 333.
• Some parameters are configurable only through the ini file (and not the
Web interface).
• To restore the device to default settings using the ini file, see ''Restoring
Factory Default Settings'' on page 215.
4.1 INI File Format
The ini file can be configured with any number of parameters. These ini file parameters can
be one of the following parameter types:
îš„ Individual parameters (see ''Configuring Individual ini File Parameters'' on page 193)
îš„ Table pa
rameters (see ''Configuring ini File Table Parameters'' on page 194)
4.1.1 Configuring Individual ini File Parameters
The format of individual ini file parameters includes an optional, subsection name (group
name) to conveniently group similar parameters by their functionality. Following this line
are the actual parameter settings. These format lines are shown below:
[subsection name]
; the subsection name is optional.
Parameter_Name = Parameter_Value
Parameter_Name = Parameter_Value
; Remark
For general ini file formatting rules, see ''General ini File Formatting Rules'' on page 196.
To Next Page
Loading...
Need help?
General
