SIP User's Manual 172 Document #: LTRT-65415
MediaPack Series
2. Click the Browse button corresponding to the file type that you want to load, navigate
to the folder in which the file is located, and then click Open; the name and path of the
file appear in the field next to the Browse button.
3. Click the Load File button corresponding to the file you want to load.
4. Repeat steps 2 through 3 for each file you want to load.
5. Save the loaded auxiliary files to flash memory, see ''Saving Configuration'' on page
169 an
d reset the device (if you have loaded a Call Progress Tones file), see
''Resetting the Device'' on page 167.
You can al
so load auxiliary files using an ini file that is loaded to the device with BootP.
Each auxiliary file has a specific ini file parameter that specifies the name of the auxiliary
file that you want to load to the device with the ini file. For a description of these ini file
parameters, see Auxiliary and Configuration Files Parameters on page 496.
¾ To load auxiliary files using an ini file:
1. In the ini file, define the auxiliary files to be loaded to the device. You can also define
in the ini file whether the loaded files must be stored in the non-volatile memory so
that the TFTP process is not required every time the device boots up.
2. Save the auxiliary files and the ini file in the same directory on your local PC.
3. Invoke a BootP/TFTP session; the ini and associated auxiliary files are loaded to the
device.
3.4.2.2 Loading Software Upgrade Key
The 'Software Upgrade Key Status' page allows you to load a new Software Upgrade Key
to the device. The device is supplied with a Software Upgrade Key, which determines the
device's supported features, capabilities, and available resources. The availability of certain
Web pages depends on the loaded Software Upgrade Key. You can upgrade or change
your device's supported features by purchasing a new Software Upgrade Key to match
your requirements.
The Software Upgrade Key is provided in string format in a text-based file (*.out). When
you load a Software Upgrade Key, it is loaded to the device's non-volatile flash memory
and overwrites the previously installed key.
You can load a Software Upgrade Key using one of the following management tools:
îš„ Web interface
îš„ BootP/TFTP configuration utility (see Loading via BootP/TFTP on page 175)
îš„ AudioCode
s’ EMS (refer to EMS User’s Manual or EMS Product Description)
Warning: Do not modify the contents of the Software Upgrade Key file.
Note: The Software Upgrade Key is an encrypted key.
To Next Page
Loading...
Need help?
General
