2. CNC Monitor Screen
2.3(II) Tool Offset (M system)
(Refer to "2.3 (I). Tool Offset (L system)" for Lathe system)
I - 83
2.3.3 Tool Life
When the menu [LIFE] is pressed, the TOOL LIFE screen is displayed.
The TOOL LIFE screen consists of the HEAD, NEXT, GROUP LIST screen and TOOL LIFE data screen.
2.3.3.1 Function Outline
The spe
cifications for TOOL LIFE changes depending on parameter "#1096 T_ Ltype" and "#1103 T_Life"
to "#1106 T count". Confirm the explanations described in the appropriate section in setup parameter.
(1) TOOL LIFE I ("#1096 T_Ltype" = 1)
The use time or count of the programmed tool is accumulated and the tool use state is monitored.
(2) TOOL LIFE II ("#1096 T_Ltype" = 2)
TOOL LIFE II is provided by adding the spare tool selection function to TOOL LIFE I. A spare tool is
selected among programmed tool commands. Tool offset and tool radius compensation are performed
for the selected tool.
To Next Page
Loading...
Need help?
General
