6. CNC Data Input/Output
6.16 Various Status
III - 54
6.16 Various Status
6.16.1 Data Protection
Data protection key 1 to 3, edit lock B and C prevent the data from being input/output.
Data cannot be copied from/to CNC, nor deleted in CNC. (Files on the memory card are not deleted.)
Parameters and keys Data protected
Data protection key 1 (KEY1) Tool offsets and workpiece offsets
Data protection key 2 (KEY2) Parameters and common variables,
CNC ladders, C register data, R register data
and T register data
Data protection key 3 (KEY3)
Machining program A
ALL.PRG
1.PRG to 7999.PRG,
10000.PRG to 99999999.PRG,
File with multiple programs
Edit lock B (#8105)
(The value "1" prohibits input/output and
delete)
Machining program B 8000.PRG to 8999.PRG
(User-prepared standard subprogram)
Edit lock C (#1121)
(The value "1" prohibits
input/output and delete)
Machining program C 9000.PRG to 9999.PRG
(Machine manufacturer customized program)
(Note) Machining program files to be protected are recognized with the file name that has been entered to
CNC. When SAMPLE.PRG in a memory card is copied to CNC, for example, the "O" No. in the file
will be used to determine whether the data protection is applied or not.
To Next Page
Loading...
Need help?
General
