6. CNC Data Input/Output
6.3 "CNC Data In/Out" Screen Display
III - 29
6.3 "CNC Data In/Out" Screen Display
The "CNC Data In/Out" screen can be used to copy the files in the CNC main unit or memory card (*Note) in
GOT to the other device, as well as to delete these files. Files in the memory card cannot be copied to the
other memory card.
Memory card is a generic term for a USB drive, an extended memory card, and a built-in CF card. An extend
memory card or a built-in CF card can be used for GT15. A USB drive, an extend memory card or a built-in
CF card can be used for GT16.
5) Function button
1)Channel selection button
2) CNC change button
3) Return button
6) Function display
7) Device button
8) Device display
9) Directory button
10) Directory display
11) File name display
12) Status
display
13) List
14) Scroll up
button
15) Scroll down
button
16) Area change
button
17) Refresh button
18) Execute
button
4) CNC unit
name
display
19) Message display
[CNC Data In/Out screen]
To Next Page
Loading...
Need help?
General
