Mitsubishi C70 User Manual

2. CNC Monitor Screen
2.5 Program
I - 143
2.5.6.2 New Program Registration and Preparation
This fun
ction is used to prepare a new machining
program.
To prepare a machining program on the EDIT screen, first
press the menu [PROGRAM] and register the machining
program number, then enter the program directly by
using the keys.
(1)
Press the menu [PROGRAM].
The setting area for PROGRAM is displayed.
SEARCH PROGRAM LARGE FILE
O( ) N ( ) - ( )
(2)
Set the new registered program
number. A comment can also be
set at the same time if necessary.
(Example)
O ( 1000) COMMENT ( TEST)
SEARCH PROGRAM LARGE FILE
O( 1000) N ( ) - ( TEST)
(3)
Press the [INPUT] key.
1) When the program number and comment
are registered in memory, they are
displayed at the screen top.
2) At the time, only one character of % is
automatically registered in memory as
data. Thus, the screen as shown in the
right is displayed.
(4)
Enter the work program in
sequence by using the keys. Key
operation is the same as normal
program edit operation.
(Note 1) To later edit the work program registered in memory by using this function, also call it by
pressing [SEARCH] as with other programs.
(Note 2) If preparing comment, space ([SPACE]) can be written in it. But, the space is ignored after
registration for efficient use of memory.

Mitsubishi C70 Specifications

General

Brand	Mitsubishi
Model	C70
Category	Control Unit
Language	English