Mitsubishi C70 User Manual

6. CNC Data Input/Output
6.5 Selecting the Function
III - 39
6.5 Selecting the Function
"CNC Data In/Out" screen has two functions, copy and delete.
"Copy" is used to copy a file selected in the upper area to the lower area. Devices in the upper and lower
area are not changed by this function.
"Delete" is used to delete a file selected in the upper area. When CNC is set in the upper area, the directory
in the same area is changed to "machining program".
• Changing to "Copy"
1) Touch the
Function button. The function selection window appears.
(For GT15)
2) Touch the
Copy button. The function name is changed to "Copy".
The upper area is bounded by the heavy line.
• Changing to the "Delete" function
1) Touch the
Function button. The function selection window appears.
(For GT15)
2) Touch the
Delete button. The function name is changed to "Delete".
The display in the lower area is cleared as the
following image.

Mitsubishi C70 Specifications

General

Brand	Mitsubishi
Model	C70
Category	Control Unit
Language	English