6. CNC Data Input/Output
6.9 Copying a File
III - 44
5) Touch "<sample01>" in the list.
<sample01>
<sample02>
1.PRG
2.PRG
3.PRG
Displays files in the sample01 directory. The
directory area shows "\sample01\".
6) Touch "123.PRG".
<..>
121.PRG
122.PRG
123.PRG
"123.PRG" is highlighted.
The file name area shows "123.PRG".
<..>
121.PRG
122.PRG
123.PRG
The directory in the lower area shows
"Machine program".
7) Touch the Exec button.
The copy confirmation window appears.
8) Touch the OK button.
The message area shows "Copying".
"Copy complete" is shown upon the
completion of copy.
(Note 1) If the OK button is touched in the copy confirmation window while the same file exists in the copy
destination, the overwrite confirmation window appears. Press the OK button to overwrite.
Press the Cancel button to close the overwrite confirmation window without any execution.
(Note 2) When a machining program file to be copied contains multiple programs, the overwrite
confirmation window (for the multiple machining programs) appears and shows the duplicated
machining programs.
(Note 3) When the data protection key 3, edit lock B and C are enabled, a file containing multiple programs
(such as ALL.PRG) cannot be copied to CNC nor PC.
To Next Page
Loading...
Need help?
General
