ENGINE MECHANICAL (RHZ ENGINE) 6A3-3
11) Disconnect negative cable at battery.
12) Remove special tool and install all glow plugs referring to
“GLOW PLUG” in Section 6E3.
13) Connect ECM connector to ECM.
14) Connect negative cable at battery.
AIR CLEANER ELEMENT
REMOVAL
1) Remove air cleaner case clamps.
2) Remove air cleaner element from case.
INSPECTION
Check air cleaner element for dirt. Replace excessively dirty ele-
ment.
CLEAN
Blow off dust by compressed air from air outlet side of element.
INSTALLATION
Reverse removal procedure for installation.
To Next Page
Loading...
Need help?
General
