ENGINE MECHANICAL (RHZ ENGINE) 6A3-7
INSTALLATION
Reverse removal procedure for installation noting following points.
D Clean mating surfaces of intake manifold and cylinder head.
D Use new intake manifold gasket.
D Check to ensure that all removed parts are back in place. Rein-
stall any necessary parts which have not been reinstalled.
D Install exhaust manifold with turbocharger referring to “TURBO-
CHARGER” in Section 6E3.
D Install throttle valve assembly referring to “THROTTLE VALVE
ASSEMBLY” in Section 6E3.
EXHAUST MANIFOLD
REMOVAL/INSTALLATION
Refer to “TURBOCHARGER” in Section 6E3.
To Next Page
Loading...
Need help?
General
