Dräger Infinity M540 User Manual

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 105
Getting started
Selecting the patient category
If the Patient profile selection function is activated
(see page 473), you can change the patient
category and select a profile from a list of pre-
configured profiles from the Start page. If the
function is deactivated, you can only change the
patient category from the Demographics page.
After changing the patient category, the new patient
category label and symbol appear in the left most
field of the header bar (see page 75).
A patient category change does not affect the
following settings: the patient and physician names,
patient ID, birth date, admit date, and height. The
weight is affected by a change in patient category
as follows:
– Changing from adult to pediatric patient catego-
ry and vice versa does not affect the weight.
– Changing from adult or pediatric patient catego-
ry to neonatal patient category causes the
weight to appear blank.
– Changing from neonatal patient category to
adult or pediatric causes the weight to appear
blank.
To change the patient category from the Start
page
The following steps are only possible when the
Patient profile selection function is activated (see
page 473).
 Select the left most field on the header bar to
access the Demographics page directly.
or
1 Select Start/Standby... on the main menu bar.
2 Select the Start tab (if not already selected).
3 Select the desired patient category button
(Adult, Pediatric, or Neonate), next to the
selection Patient category.
4 Press the rotary knob to confirm the setting.
5 Select a profile using the down arrow next to the
selection Profile.
The Cockpit switches to the new patient category
and the selected profile.
To change the patient category in the
Demographics page
 Select the left most field on the header bar to
access the Demographics page directly.
or
1 Select Start/Standby... on the main menu bar.
2 Select the Demographics tab (if not already
selected).
3 Select the desired patient category button
(Adult, Pediatric, or Neonate)
, next to the
selection Patie
nt category.
4 Press the rotary knob to confirm the setting.
The Cockpit switches to the new patient category
and the default profile for the new patient category.

Dräger Infinity M540 Specifications

General

Brand	Dräger
Model	Infinity M540
Category	Monitor
Language	English