Dräger Infinity M540 User Manual

Operating concept
76 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Settings included in a profile
The following table lists all of the settings included
in a patient profile. For details on each setting, such
as available selections and detailed descriptions of
the setting, refer to the cross-referenced pages.
Parameter Included settings
Parameter-specific profile settings
ECG
(see page 212)
Size [mV/cm]
Size All ECG [mV/cm]
Pulse tone volume
Tone source
HR source
Waveforms
Leads
Filter
Pacer detection
QRS sync marker
ARR Processing
Resp. monitoring
Color
Alarm limits
Alarm on/off setting
Alarm archive setting
Arrhythmia
(see page 225)
ARR mode
Alarm archive setting
Alarm priority (high,
medium, low or off)
Arrhythmia alarm
settings
(see page 134)
Alarm priority
Rate
Count
ST
(see page 234)
ST monitoring
ST lead1
ST lead2
ST lead3
ST Mini Trend
TruST 12-lead
Event duration [s]
Selected isoelectric point
Selected ST measuring
point
Alarm on/off setting
Alarm limits
Alarm archive setting
Temperature
(see page 287)
Color
Alarm on/off setting
Alarm limits
Alarm archive setting
SpO2 (Nellcor)
(see page 278)
Pulse tone volume
Tone source
Waveform size [%]
SatSeconds alarm
Color
Alarm on/off setting
Alarm limits
Archive setting and alarm
priority for SpO2 check
sensor alarm
Alarm archive setting
Parameter Included settings

Dräger Infinity M540 Specifications

General

Brand	Dräger
Model	Infinity M540
Category	Monitor
Language	English