Cardiac output (C.O.)
326 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Cardiac output display
On the Cockpit, the cardiac output display consists
of a parameter field.
Parameter fields report parameter values and
indicate the alarm status of parameters. Parameter
fields can also report technical conditions such as
disconnected sensors, and so on. For detailed
information regarding the content of parameter
fields for each parameter, see the chapter
"Troubleshooting" on page 509.
The cardiac output parameter field contains the
following elements:
A C.O. label
B Time stamp of the last saved cardiac output
average (this area is blank if no measurements
have been taken over the past 24 hours)
C Blood temperature label
D Blood temperature (Tblood) value – acquired
from the hemodynamic pod
E Upper/lower alarm limits or crossed triangle
symbol when alarms are deactivated
F Injectate temperature label
G Injectate temperature value
H Previously saved cardiac output value –
average of a series of saved measurements
NOTE
The following diagram shows a typical parameter
field layout. This layout may change when
additional parameters are put on display. For
more information, see "Parameter fields" on
page 62. Temperature values in parameter fields
may display with a decimal point instead of a
comma.
046
To Next Page
Loading...
Need help?
General