Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 497
Reports/recordings
Continuous recordings
Continuous recordings are almost identical to timed
recordings (see figure on page 495). The only
difference is that a continuous recording runs until
you manually interrupt it unlike a timed recording,
which runs for a specified time.
The waveform labels, scale bars, and the scales
are printed once for each parameter.
To request a continuous recording
Select the symbol next to the Trends/ Data...
button on the main menu bar > Continuous
recording.
Causes for automatic cancellation of
recordings
Any active timed or continuous recording is
automatically canceled under the following
circumstances:
– If the Cockpit loses its connection to the
network. The recordings resume when the
network connection is restored.
– If you place the Cockpit into standby mode
– If you discharge a patient
Requesting recordings
The following table lists where you can request
manual timed and continuous recordings.
Type of report Description How to request the recording
Timed recording A strip recording of a
specified duration (see
page 495).
Select the symbol next to the Trends/ Data...
button on the main menu bar > Timed
recording
Select the Trends/ Data... button on the main
menu bar > Trends > Reports > General
reports > Timed recording
Continuous
recording
A strip recording that
continues until manually
stopped (see page 497).
Select the symbol next to the Trends/ Data...
button on the main menu bar > Continuous
recording
Select the Trends/ Data... button on the main
menu bar > Trends > Reports > General
reports > Continuous recording
To Next Page
Loading...
Need help?
General