External devices – Evita 2D, Evita 4, Evita XL (Medibus)
434 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Supported Medibus ventilator data
The Evita ventilators (Evita 2D, Evita 4, and Evita
XL) send parameters, settings, modes and alarm
messages to the Cockpit.
Certain ventilator parameters, settings, and
ventilation modes are broadcast to the Infinity
network. In addition, a limited number of alarms are
made available to the Infinity network.
Refer to the RS-232 export handbook for
information on which parameters are available for
export protocol and which settings and modes are
supported. The RS-232 export handbook is
available in English only.
Supported Medibus parameters on the Cockpit
The following table lists which parameters are
displayed and trended on the Cockpit. Refer to
page 433 for a list of supported ventilators and the
compatible software versions.
Parameter
label
Description Unit of
measure-
ment
Displayed in
Ventilation Show
all page (see
page 438) Yes/No?
Cockpit
Trends page
Available
for display
in
parameter
field
Yes/No?
Cdyn Dynamic compliance L/bar Yes Continuous No
etCO2 End-tidal carbon
dioxide
concentration
mmHg Yes Continuous and
mini-trend
Yes
kPa
%
FiO2 Inspiratory oxygen
fraction
% Yes Continuous No
MVe Minute volume,
expired
L/min Yes Continuous and
mini-trend
Yes
MVspon Minute volume,
expired,
spontaneous
L/min Yes Continuous No
P0.1 Occlusion pressure mbar or
cmH2O
Not supported for
display.
Not trended No
PEEP Peak end expiratory
airway pressure
mbar or
cmH2O
Yes Continous Yes
Pmean Mean airway
pressure
mbar or
cmH2O
Yes Continuous Yes
Pmin Minimum airway
pressure
mbar or
cmH2O
Yes Not trended No
To Next Page
General
