Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 287
Temperature
Accessing the temperature settings
Select the temperature parameter field to select
the Temp. page directly.
or
1 Select Sensor parameters... from the main
menu bar.
2 Select the Temp. (Temp. 1) tab to access the
Temp. page. If you cannot see the tab, select
the following two symbols located in the upper
right corner of the dialog: symbol and the
display filter button.
The top portion of the page contains the Auto set
and Alarm buttons for configuring the alarm
functions. For detailed alarm setup information, see
"Configuring the alarm settings for a patient" on
page 125.
Temperature parameter setup functions
All temperature setup functions take place in the
Temp./Temp. 1 pages (see page 287).
Selection Available settings Description
Parameters – Ta - Tb (T1a - T1b)
–Ta - ΔT (T1a - ΔT1)
Selects which parameters are
displayed in the parameter field.
Color Red, green, blue, yellow, light blue, purple,
orange, white (default).
Determines the color of the
parameter labels and values.
To Next Page
Loading...
Need help?
General