Dräger Infinity M540 User Manual

System configuration
444 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Overview
This chapter describes the System setup dialog
which consists of several setup pages for
configuring the Cockpit. Some of these setup
pages are password protected and are only
accessible to authorized personnel.
The System setup dialog consists of the following
setup pages:
– Screen setup (see page 444)
–Alarms (see page 458)
– Recordings/ Reports (see page 467)
–Biomed (see page 470)
– Profiles (see page 484)
Most setup pages consist of selections for
configuring individual features. In the following
sections such setup pages are presented as tables
which list each menu selection, the available
settings, and a description. Some setup pages are
more complex and are therefore described in more
detail. Where necessary, diagrams clarify
additional setup procedures.
Screen setup
Several Screen setup pages are available for
configuring the layout and the content of the
screen.
To access the screen setup functions
1 Select the System setup... button on the main
menu bar.
2 Select the Screen setup tab (if not already
selected).
3 Select one of the following tabs to access the
corresponding setup page:
– General settings
– Auto view (if the auto view setup toolbar is
visible along the bottom of the screen, you
can also select the Setup button in the lower
right corner of the screen to access the
Auto view page)
– Views (password required)
– Config. buttons (password required)
– Multi-tab split screen
– View editor (password required)

Dräger Infinity M540 Specifications

General

Brand	Dräger
Model	Infinity M540
Category	Monitor
Language	English