ACTION FOR Low precisions
Phenomena: Bucket edge accuracy is low
.
If the locus condition (position, number, etc.) of GNSS satellite
is bad, the blade edge accuracy is degraded to a “Low preci-
sions...” state.
This is not a system error. Wait for the locus condition to be re-
stored. Rough digging which does not require the accuracy can
be performed.
ACTION FOR Out of design area
Phenomena: Bucket edge of hydraulic excavator is out of “De-
sign Data”.
Return the bucket edge to inside of “Design Data”.
ACTION FOR Avoidance Area Breach
Phenomena: Hydraulic excavator is in the operation prohibited
area.
Move the hydraulic excavator to outside of the operation pro-
hibited area.
TROUBLES AND ACTIONS OPERATION
3-82
To Next Page
Loading...
Need help?
General
