(1) “Triangle mesh in Top Views”
Y
ou can perform the display setting for Triangle mesh in Sur-
face view.
(2) “Triangle mesh in Bird Eye View”
You can perform the display setting for Triangle mesh in 3D
View.
(3) “Boundaries/breaklines”
You can perform the display setting of Boundaries/breaklines.
(4) “Contours at interval”
You can perform the display setting for Contours at interval.
(5) “Contours color”
You can perform the display setting for Contours color.
(6) “Cross section color”
You can perform the display setting for Surface color displayed in Cross section view.
(7) “Cross section filling color”
You can perform the display setting for color of piled soil (filling color) displayed in Cross section view.
(8) “Grade transitions”
You can perform the display setting for the color of Grade transitions.
(9) ENTER button
Tap ENTER button and new setting is saved.
(10) RETURN button
Tap RETURN button and the screen returns to the working screen.
METHOD FOR DISPLAY SETTING OF TRIANGLE MESH IN TOP VIEW
You can perform the display setting of Triangle mesh in Surface view.
CONTROL BOX SETTING
7-100
To Next Page
Loading...
Need help?
General
