METHOD FOR PARKING MACHINE
WARNING
• Stop the machine gradually. Avoid a sudden stop.
•
Place the machine on a firm and level place.
Do not park the machine on a slope.
Block the tracks from movement if it is unavoidably
necessary to park the machine on a slope. As an addi-
tional safety measure, thrust the work equipment into
the ground.
• The machine may move suddenly if the control lever is
touched by accident. This may lead to a serious per-
sonal injury or death. Set the lock lever securely to
LOCK position and stop the engine always before
leaving the operator's seat.
1.
Set the right and left travel levers (1) in NEUTRAL posi-
tion.
The machine stops.
2.
Turn the fuel control dial (2) to low idle (MIN) position in or-
der to lower the engine speed.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-57
To Next Page
Loading...
Need help?
General
