You can select the display range from the following 3 patterns.
METHOD FOR SETTING SOUND VOLUME
1.
You can set the volume of the Sound for each color of the
Light Bar
.
Tap the button (1) and the volume decreases.
Tap the button (2) and the volume increases.
REMARK
Each time the button (1) or (2) is tapped, the green indica-
tor decreases or increases.
2.
There are 2 green tolerances of the Light Bar, and the
Sound
Volume can be set separately for the position of the
bucket edge either above Surface or below Surface.
(3): The volume can be set in the case that the bucket
edge is within the green range of the Light Bar, and
above the Surface.
(4): The volume can be set in the case that the bucket
edge is within the green range of the Light Bar, and be-
low the Surface.
METHOD FOR SETTING SOUND TONE
1.
Tap the button (1) on the Sound Volume setting screen,
the screen changes to the T
one Settings screen.
You can select the Tone from 3 patterns.
SETTING CONTROL BOX
7-57
To Next Page
Loading...
Need help?
General
