METHOD FOR SETTING GRADES
Set the unit of grades displayed on the working screen.
The following units can be set.
•
“Percent (%)”
• “Run:Rise”
• “Rise:Run”
METHOD FOR SETTING STATIONS
You can set the Unit of additional distances displayed on the
working screen.
The following units can be set.
• “100.000”
• “1+00.000”
• “10+0.000”
• “1+000.000”
METHOD FOR SETTING VOLUMES
Set the Unit of Volumes displayed on the working screen.
The following units can be set.
• “Cubic meters”
• “Cubic yards”
SETTING CONTROL BOX
7-117