2.
T
ap “Tools” button on the main menu screen, and the
screen changes to “Tools” setting screen.
SETTING ITEMS BY TOOLS
The following contents can be set with Tools menu.
(1) “Topo Survey”
You can perform the setting of the Topo survey.
(2) “Navigation”
You can perform the setting of the Navigation.
(3) “Supervisor”
The supervisor can change the setting of the intelligent Ma-
chine Control system on his (her) authority.
(4) “Restart Connection”
You can obtain the satellite information again.
(5) “About Product”
You can display the intelligent Machine Control system informa-
tion.
(6) RETURN button
Tap RETURN button and the screen returns to the previous screen.
METHOD FOR SETTING TOPO SURVEY
You can observe the current terrain by saving the data of the bucket edge position. For the observation, there
are manual method and automatic method. In the manual method, a single datum is saved. In the automatic
method, data are saved continuously.
Tap “Topo Survey” button in the Tools menu.
The screen changes to Topo survey setting screen.
CONTROL BOX SETTING
7-132
To Next Page
Loading...
Need help?
General
