DISPLAY DISTANCE BETWEEN BUCKET EDGE AND DESIGN SURFACE
The
cutting amount to the design data is displayed as the verti-
cal distance between bucket edge and the design data (directly
under the bucket edge position).
If the bucket edge cuts in the design data, distance is not dis-
played in minus, but display changes to fill amount to the de-
sign data.
DISPLAY BUCKET EDGE POSITION ALGNMENT STATION
The bucket edge position is displayed in the Alignment station with the observation point.
DISPLAY DISTANCE BETWEEN CENTER LINE AND BUCKET EDGE POSITION
Distance between center line and bucket edge is displayed in
Alignment offset.
METHOD FOR MEASURING BUCKET EDGE POSITION
When measuring the bucket edge position again, tap “Meas-
ure...” button.
Measurement starts.
EXECUTIONS BUCKET EDGE POSITION
8-27
To Next Page
Loading...
Need help?
General
