1. Caution for operation, inspection and maintenance
2. Caution before operating
3. Caution when leaving operator's seat
4. Caution against high-voltage cables
5. Caution for control pattern
6. Caution when opening or closing front window
7. Caution when stowing front window
8. Caution for high-temperature oil
9. Caution for high-temperature coolant
10. Caution for handling accumulator and gas spring
1
1. Caution for adjusting track tension
12. Caution for handling cable
13. Stop rotation during inspection and maintenance
14. Emergency escape
15. Caution against falling
16. Caution when swinging and traveling in reverse
17. Prohibition of entering within swing range
18. Caution for work equipment
19. Caution for handling battery
20. Prohibition of start by short-circuiting
21. Caution for blast site
22. Caution for high-pressure fuel
23. Caution when changing control pattern (machine
with control pattern changeover valve)
24. Caution for control pattern
25. Caution for handling ROPS
26. Prohibition of use of ether
27. Caution for handling DEF
28. Caution for high-temperature resistance
29. Caution for handling control box
30. Auto/Manual switch
31. Boom secondary drive switch
32. Caution for cylinder function when starting engine
For details of safety labels 1 to 28, see the Operation and Maintenance Manual of standard machine.
SAFETY LABELS
Caution for handling control box
“2A5-00-21330”
SAFETY SAFETY LABELS
2-5
To Next Page
Loading...
Need help?
General
