PASS COUNT SETTINGS
In
Project File Settings, set the display of “As-Built” to “Pass
Count” display, and you can perform the setting of display color
in the case that the Plan view is set to Main in the screen lay-
out.
Tap “Pass Count” tab on the setting screen of “As-Built”.
METHOD FOR SETTING PASS COUNT COLOR SELECTION
(1) Tap the Pass Count of which you want to change the dis-
play color.
The screen changes to the screen of “Color Selection”. Select
any color and tap ENTER button.
REMARK
If you tap the Default Color, the default color is set.
(2) “Restore Default”
Restores the interval and offset value to the default value.
(3) “Cross Section”
Displays the Elevation of As-Built with a line in the Profile view
or Section view.
(4) ENTER button
Tap ENTER button and the setting is saved.
(5) RETURN button
Tap RETURN button and the screen returns to the previous
screen.
AS-BUILT ADVANCED MENU
On “Advanced” screen of “As-Built”, you can perform the setting of Server/Local for As-Built Control manage-
ment and Selection/Deletion of As-Built Control file.
CONTROL BOX SETTING
7-68
To Next Page
Loading...
Need help?
General
