Lighting color State
Flashing in green
Not being connected to SiteLink server.
(No GPRS connection information is obtained)
Green
Connection to SiteLink server is established, but no RTK compensation informa-
tion is obtained.
Green, red
(flashes alternately)
Connection to SiteLink server is established, and GPS compensation information
is received.
Display of the blue tooth state LED
Lighting color State
Not lit Connection to the blue tooth is not established.
OTHER EQUIPMENT
METHOD FOR OPENING AND CLOSING CAB FRONT WINDOW
WARNING
• Set
the lock lever in LOCK position always when opening or closing the front window, bottom win-
dow, or door.
If the control lever or control pedal is touched by mistake when the lock lever is in FREE position, it
may cause serious personal injury or death.
• When opening or closing the front window or bottom window, stop the machine on a level ground,
lower the work equipment to the ground, stop the engine, and then perform the work.
• Stow the control box before opening or closing the front window. Return the control box in the orig-
inal position immediately after opening or closing the front window.
• Do not start the engine with control box being stowed.
• When opening the front window, hold the handle securely with both hands to pull up, and do not
release your hands until the front window is locked by the automatic lock catch.
• Hold the handles securely with both hands when closing the front window otherwise it may drop
under its own weight.
It is possible to stow (pull-up) the front window (upper side) in the roof of the operator's compartment.
METHOD FOR OPENING CAB FRONT WINDOW
1.
Lower the work equipment to the level ground, and set the
lock lever (1) securely to LOCK position (L).
2.
Stop the engine.
OPERATION EXPLANATION OF COMPONENTS
3-25
To Next Page
Loading...
Need help?
General
