METHOD FOR SETTING MINIMUM HORIZ. DISTANCE
T
ap “Minimum horz. distance” column, and input the moving
distance of the work equipment of which you want to save the
data.
METHOD FOR OFFSETTING LOWER ELEVATIONS
Tap “Lower elevations by:” column and input the value to be
offset to the Elevation.
You can offset the Elevation Coordinates of bucket edge (of
which position is measured and saved) and save the data.
METHOD FOR SETTING TOPO BUTTON
1.
When “Not active” is selected, the data are automatically
saved
under the condition of Auto-Topo from the start to
the end of saving.
2.
When “Topo shot(prompt for detail)” or “Topo shot(no
prompt)” is selected, the Auto-Topo is deactivated.
CONTROL BOX SETTING
7-136
To Next Page
Loading...
Need help?
General
