METHOD FOR SETTING AUTOMATIC TOPO SURVEY (TIME BASED)
METHOD FOR SETTING LA
YERS
Tap “Project layer for Topo:” column, and select the layer to
which the Topo survey point is saved.
METHOD FOR SETTING BUCKET EDGE
Tap “Log at:” column, and select the bucket edge position for
which Topo survey is performed.
“Bucket:Left”: Bucket edge at left end
“Bucket:Middle”: Bucket edge at center
“Bucket:Right”: Bucket edge at right end
“Left and Right Edge”: Bucket edge at both ends
METHOD FOR SETTING AUTO-TOPO (FIXED TIME INTERVAL)
To perform the automatic Topo survey (fixed time interval), tap
“Auto-Topo:” column, and select “Fixed time interval”.
Coordinates of the bucket edge can be saved continuously with
the set time interval.
SETTING CONTROL BOX
7-137
To Next Page
Loading...
Need help?
General
