Select “Coord. system” tab, and select “Use predefined projec-
tion”,
and then use the coordinates system of “World Geodetic
System”.
Display contents of “Projection” tab
(1) “Projection:”: The name of the Projection is displayed.
(2) “Datum:”: The name of the world geodetic system is dis-
played.
(3) “Ellipsoid:”: The name of the Ellipsoid is displayed.
(4) “Use geoid model”: To use the Geoid model, put a tick in the
check box to select the model name.
REMARK
BESS is the name of Ellipsoid.
METHOD FOR COPYING GEOID FILES
You can create the copy of the Geoid File.
Connect the USB flash drive to the control box.
Copy the Geoid File from USB flash drive to the control box.
1.
Tap “Copy” button.
The screen changes to
“Copy Files” screen.
SETTING CONTROL BOX
7-21
To Next Page
Loading...
Need help?
General
