Mindray BeneVision N Series User Manual

19 - 2 BeneVision N Series Patient Monitor Operator’s Manual
19.4 Accessing the On-screen ScvO
2
Guide
The monitor provides the on-screen ScvO
2
guide to help you understand ScvO
2
monitoring principles,
functions, and operating procedure. To access the on-screen ScvO
2
guide, follow this procedure:
1. Select the ScvO
2
numeric area to enter the ScvO2 menu.
2. Select the Introduction tab.
3. Select the desired tab of Summary, Target Patients, Points To Note, or Operation Guides.
19.5 ScvO
2
Equipment to Patient Connection
19.6 Measuring ScvO
2
To perform the ScvO
2
measurements, follow this procedure:
1. Apply the central venous catheter.
2. Place one end of the fiberoptic probe into the central venous catheter through the distal lumina, and
connect the other end to the CeVOX optical module.
3. Plug the CeVOX cable into the ScvO
2
module.
4. If you see the message Calibration Required, calibrate the ScvO
2
before performing the measurements.
For more information, see 19.7ScvO
2 Calibration
.
5. Check the reading in the ScvO
2
numeric area.
WARNING
• To avoid application failure, ensure that the proper fiberoptic probe is selected.
• The monitor may only be regarded as a device providing early warning. If there is an indication of a
trend towards de-oxygenation of the patient, blood samples must be taken and tested on a
laboratory oximeter in order to arrive at a decision concerning the condition of the patient.
• Incorrect placement of the fiberoptic probe can lead to vessel perforation. Therefore, check the
correct position of the probe as indicated in the probe’s instructions for use.
(1) ScvO
2
module (2) CeVOX optical module
(3) CeVOX fiberoptic probe (4) Central venous catheter

Mindray BeneVision N Series Specifications

General

Brand	Mindray
Model	BeneVision N Series
Category	Medical Equipment
Language	English