Mindray BeneVision N Series User Manual

BeneVision N Series Patient Monitor Operator’s Manual 37 - 1
37 Printing
The monitor can output patient reports via network printer or print server.
37.1 Supported Printer
The monitor supports the following printer:
■ HP LaserJet Pro M202dw
■ HP LaserJet Pro M203dn
■ HP LaserJet Pro M203dw
■ HP LaserJet Enterprise M605
■ HP LaserJet P4015n
■ HP LaserJet Pro 400 M401n
■ HP LaserJet Pro 403n
■ HP LaserJet 600 M602
NOTE
• For more details about the printer, see the document accompanying the printer. With product
upgrades, the monitor may support more printers and no prior notice will be given. If you have any
doubt about the printer you have purchased, contact Mindray.
37.2 End Case Reports
37.2.1 Printing the End Case Report
To print the end case report, choose one of the following ways:
■ Select Print from the End Case Report menu.
■ Select Print End Case Report when you discharge a patient
■ Select the End Case Report quick key.
37.2.2 Setting a Report as An End Case Report
The following reports can be set as end case reports:
■ Tabular Trends Report
■ Graphic Trend Report
■ Event Report
■ 12-lead Interpretation
■ Alarm Limits Report
■ Realtime Report
■ ECG Report
To set a report as an end case report, follow this procedure:
1. Select the Main Menu quick key → from the Report column select End Case Report.
2. From the Select Reports page, select the checkbox before the desired report, for example ECG Report.

Mindray BeneVision N Series Specifications

General

Brand	Mindray
Model	BeneVision N Series
Category	Medical Equipment
Language	English