Mindray BeneVision N Series User Manual

BeneVision N Series Patient Monitor Operator’s Manual 2 - 11
2.3.4 Satellite Module Rack (SMR)
The SMR provides interface between the monitor and external modules. The SMR has eight module slots. It is
connected to the main unit through the SMR connector.
The following pictures show the indicator and connectors on the SMR.
2.3.5 External Modules
The external modules are used to monitor the patient’s physiological parameters, record patient information
and data, and connect external devices. The monitor provides the following modules:
■ Parameter modules: acquires and processes the patient’s data and sends the data to the main unit.
■ Recorder module: prints patient information, parameter measurements and waveforms.
■ BeneLink module: connects external devices. The monitor outputs data from external devices through the
BeneLink module.
2.3.5.1 Available Modules
The following table lists available modules
(1) SMR status indicator: illuminates when the SMR is powered on.
(2) Monitor connector: connects the BeneView monitor.
(3) Monitor connector: connects the BeneVision monitor.
(1)
(2) (3)
Module label Comments
MPM Integrates 3/5-lead ECG, Resp, SpO
2
, Temp, NIBP, IBP monitoring, or 3/5/6/12-lead ECG, Resp, SpO
2
,
Temp, NIBP, IBP monitoring, and analog output
SpO
2
Supports SpO
2
monitoring
Temp module Supports temperature
monitoring
C.O. Supports C.O.
monitoring

Mindray BeneVision N Series Specifications

General

Brand	Mindray
Model	BeneVision N Series
Category	Medical Equipment
Language	English