Mindray BeneVision N Series User Manual

BeneVision N Series Patient Monitor Operator’s Manual 20 - 1
20 Monitoring CCO/SvO
2
20.1 CCO/SvO
2
Introduction
The Edwards Vigilance II, Vigileo, EV1000, and HemoSphere monitors measure continuous cardiac output (CCO),
mixed venous oxygen saturation (SvO
2
), central venous oxygen saturation (ScvO
2
) etc. They also calculate
hemodynamic and oxygenation parameters. This monitor can be connected to the Vigilance II/Vigileo/EV1000/
HemoSphere monitor and can display, store, and review the measured and calculated parameter values from
these monitors. This monitor can also give alarms of these measured parameters. You must set alarm on/off,
alarm limits, alarm priority, and alarm record separately on this monitor. The alarm is On by default.
The Vigilance II, Vigileo, EV1000, and HemoSphere monitors are manufactured by Edwards Lifesciences. This
company provides the technology of measuring and calculating the relevant parameters. We only provide the
connection between this monitor and Vigilance II/Vigileo/EV1000/HemoSphere monitor. If you have any doubts
about the operation and maintenance of theVigilance II/Vigileo/EV1000/HemoSphere monitor, read the
operator’s manuals of corresponding monitor, or contact Edwards Lifesciences (www.edwards.com) directly.
The CCO/SvO
2
module is only intended for adult and pediatric patients.
(1) CCO/SvO2 menu hard key
(2) Calibration key (for
Vigilance II and Vigileo monitor)
(3) Module status indicator (4) CCO/SvO
2
cable connector
(1) (2)
(4)
(3)

Mindray BeneVision N Series Specifications

General

Brand	Mindray
Model	BeneVision N Series
Category	Medical Equipment
Language	English