Siemens SINUMERIK 810D User Manual

5
"Parameters" Operating Area 03.04
5.5 Settin
g
data
5
Ó Siemens AG, 2004. All rights reserved
5-236 SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Change JOG data:
Position the cursor bar on the appropriate input field and enter a new
value or
select a new value using the "Select" key.
Other information
The limit values for the maximum and minimum permissible values
are defined in the machine data.
5.5.3 Spindle data
Function
Max./min.
The value entered for the spindle speed in the fields max./min. must
be within the limit values defined in the machine data.
Programmed
Programmable upper speed limit (G96) for constant cutting speed.
Operating sequence
Setting
data
Select softkey "Setting data".
The vertical softkey bar changes.
Spindle
data
Select softkey "Spindle data".
The "Spindle data - limitation" window opens.
Change spindle data:
Position the cursor bar on the appropriate input field and enter a new
value or
select a new value using the "Select" key.
Other information
· The limit values for the maximum and minimum permissible values
are defined in the machine data.
· The "Spindle data" function is displayed only if a spindle is
configured.

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English