Siemens SINUMERIK 810D User Manual

7
"Services" Operating Area 03.04
7.1 Function
7
Ó Siemens AG, 2004. All rights reserved
7-360 SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
7.1 Function
The "Services" Operating Area provides the following functions:
· Read data in/out
· Manage data
· Series start-up
7.2 Directory structure
All files are organized in a directory structure.
Files in the NC memory and on the hard disk, sorted in "file trees" in
directories.
7.2.1 NC active data
The NC memory contains data (e.g. R parameters, tool offsets,
machine data) that are not stored there in file format.
The directory "NC active data" is provided in the file manager to allow
the user to access these data and store them on the hard disk in file
format.
This directory contains an overview of data that can be copied from
the NC memory.
If the operator wishes to save data in files on the hard disk,
they can set up the same directory structure under a directory
of any name for "NC data" (.MDN).
Via "Copy/paste" any active data can be fetched from the NC and
stored in files on the hard disk.
NC-active data cannot be unloaded.

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English