Siemens SINUMERIK 810D User Manual

1
03.04 Introduction
1.3
A
ctivation/deactivation
1
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition 1-25
1.3 Activation/deactivation
Function
Activation
A variety of methods can be employed to switch on the power supply
to the control system or to the whole plant.
Machine manufacturer
Please follow the machine manufacturer's instructions!
After the control has been switched on, the "Reference point
approach" display or another basic display programmed by the
machine manufacturer will appear.
Machine
Channel Reset
Program aborted
Jog
MKS Position.Repos-Versch.
+ X 900.000 mm 0.000
- Y -156.000 mm 0.000
+ Z 230.000 mm 0.000
MCS Position
+X900.000mm0.000
-Y-156.000mm0.000
+Z230.000mm0.000
-X 0.000 mm
+Y 0.000 mm
+Z 0.000 mm
+0.000mm
Tool
preselected tool :
G0 G91
Master spindle S1
Act. + 0.000 rev./min
Set 0.000 rev./min
Pos. 0.000 deg.
0.000 %
Power [%\
Feedrate mm/min
Act. 0.000 0.000 %
Set 0.000
REF
Deactivation
Please follow the instructions for switching off the control or the entire
system!
Machine manufacturer
Please follow the machine manufacturer's instructions!

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English