AudioCodes Mediant 3000 User Manual

User's Manual 1056 Document #: LTRT-89730
Mediant 3000
Parameter Description
e]
58.14.2.3 LDAP Parameters
The Lightweight Directory Access Protocol (LDAP) parameters are described in the table
below.
Table 58-76: LDAP Parameters
Parameter Description
LDAP Service
[LDAPServiceEnable]
Enables the LDAP feature.
 [0] Disable (default)
 [1] Enable
Note: For the parameter to take effect, a device reset is required.
LDAP Authentication Filter
[LDAPAuthFilter]
Defines the LDAP search filter attribute for searching the login
username in the directory's subtree for LDAP-based user
authentication and authorization.
You can use the dollar ($) sign to represent the username. For
example, if the parameter is set to "(sAMAccountName=$)" and the
user logs in with the username "SueM", the LDAP query is run for
sAMAccountName=SueM.
Use LDAP for Web/Telnet
Login
[MgmtLDAPLogin]
Enables LDAP-based management-user login authentication and
authorization.
 [0] Disable (default)
 [1] Enable
Note: For the parameter to take effect, a device reset is required.
[LDAPDebugMode] Determines whether to enable the LDAP task debug messages. This
is used for providing debug information regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
LDAP Numeric Attribute
configure voip > sip-
definition advanced-
settings > ldap-
numeric-attr
[LDAPNumericAttributes]
Defines up to five LDAP Attributes (separated by commas) for which
the device employs LDAP query searches in the AD for numbers that
may have characters between the digits.
For more information, see Enabling LDAP Searches for Numbers with
Characters on page 265.
MS LDAP OCS Number
attribute name
[MSLDAPOCSNumAttribute
Name]
Defines the name of the attribute that represents the user's Lync
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"msRTCSIP-PrimaryUserAddress".
MS LDAP PBX Number
attribute name
[MSLDAPPBXNumAttributeN
ame]
Defines the name of the attribute that represents the user PBX
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"telephoneNumber".
MS LDAP MOBILE Number
attribute name
Defines the name of the attribute that represents the user Mobile
number in the Microsoft AD database.

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English