AudioCodes Mediant 3000 User Manual

User's Manual 880 Document #: LTRT-89730
Mediant 3000
58.6 Control Network Parameters
58.6.1 IP Group, Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 58-33: Proxy, Registration and Authentication SIP Parameters
Parameter Description
IP Group Table
IP Group Table
[IPGroup]
This table configures IP Groups.
The format of the ini file table parameter is:
[ IPGroup ]
FORMAT IPGroup_Index = IPGroup_Type, IPGroup_Name,
IPGroup_ProxySetName, IPGroup_SIPGroupName,
IPGroup_ContactUser, IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_SRDName,
IPGroup_MediaRealm, IPGroup_ClassifyByProxySet,
IPGroup_ProfileName, IPGroup_MaxNumOfRegUsers,
IPGroup_InboundManSet, IPGroup_OutboundManSet,
IPGroup_RegistrationMode, IPGroup_AuthenticationMode,
IPGroup_MethodList, IPGroup_EnableSBCClientForking,
IPGroup_SourceUriInput, IPGroup_DestUriInput,
IPGroup_ContactName, IPGroup_Username, IPGroup_Password,
IPGroup_UUIFormat, IPGroup_QOEProfile, IPGroup_BWProfile,
IPGroup_MediaEnhancementProfile, IPGroup_AlwaysUseSourceAddr,
IPGroup_MsgManUserDef1, IPGroup_MsgManUserDef2,
IPGroup_SIPConnect, IPGroup_SBCPSAPMode,
IPGroup_DTLSContext, IPGroup_CreatedByRoutingServer,
IPGroup_UsedByRoutingServer, IPGroup_SBCOperationMode,
IPGroup_SBCRouteUsingRequestURIPort;
[/IPGroup]
For a description of the table, see ''Configuring IP Groups'' on page 343.
Note: For the parameter to take effect, a device reset is required.
Account Table
Account Table
[Account]
Defines user accounts for registering and/or authenticating (digest)
Trunk Groups or IP Groups (e.g., an IP-PBX) with a Serving IP Group
(e.g., a registrar server).
The format of the ini file table parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroupName, Account_ServingIPGroupName,
Account_Username, Account_Password, Account_HostName,
Account_Register, Account_ContactUser, Account_ApplicationType;
[\Account]
For a detailed description of the table, see ''Configuring Registration
Accounts'' on page 363.
Proxy Registration Parameters
Use Default Proxy Enables the use of Proxy Set ID 0 (for backward compatibility).
 [0] No = (Default) Proxy Set 0 is not used.

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English