User's Manual 766 Document #: LTRT-89730
Mediant 3000
CDR Field Name Description
LocalRFactor
Local conversation quality
Note: If the RTCP XR feature is unavailable (not licensed or
disabled), this R-factor VoIP metric is not provided. Instead, the
device sends the CDR field with the value 127, meaning that
information is unavailable.
RemoteRFactor
Remote conversation quality
Note: If the RTCP XR feature is unavailable (not licensed or
disabled), this R-factor VoIP metric is not provided. Instead, the
device sends the CDR field with the value 127, meaning that
information is unavailable.
LocalMosCQ
Local MOS for conversation
RemoteMosCQ
Remote MOS for conversation
TxRTPIPDiffServ
Media IP DiffServ
LatchedRtpIp
Remote IP address of the incoming RTP stream that the device
"latched" on to as a result of the RTP latching mechanism for NAT
traversal.
LatchedRtpPort
Remote RTP port of the incoming RTP stream that the device
"latched" on to as a result of the RTP latching mechanism for NAT
traversal.
LatchedT38Ip
Latching of a new T.38 stream - new IP address
LatchedT38Port
Latching of a new T.38 stream - new port
52.2.1.3 CDR Fields for Gateway Application
The default CDR fields for the Gateway calls are listed in the table below.
Table 52-4: Default CDR Fields for Gateway Calls
Field Name Description
GWReportType
Report type:
 CALL_START
 CALL_CONNECT
 CALL_END
Cid
Port number
SessionId
SIP session identifier
Trunk
Physical trunk number
BChan
Selected B-channel
ConId
SIP conference ID
TG
Trunk Group ID
To Next Page
Loading...
Need help?
General
