AudioCodes Mediant 3000 User Manual

Version 7.0 1059 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Parameter Description
CostGroupTable_DefaultMinuteCost;
[ \CostGroupTable ]
For example: CostGroupTable 2 = "Local Calls", 2, 1;
For a description of the table, see ''Configuring Cost Groups'' on page
275.
Cost Group > Time Band
Table
[CostGroupTimebands]
Defines time bands and associates them with Cost Groups.
[CostGroupTimebands]
FORMAT CostGroupTimebands_TimebandIndex =
CostGroupTimebands_StartTime, CostGroupTimebands_EndTime,
CostGroupTimebands_ConnectionCost,
CostGroupTimebands_MinuteCost;
[\CostGroupTimebands]
For a description of the table, see ''Configuring Time Bands for Cost
Groups'' on page 276.
58.14.4 Call Setup Rules Parameters
The Call Setup Rules parameters are described in the table below.
Table 58-78: Call Setup Rules Parameters
Parameter Description
Call Setup Rules
[CallSetupRules]
Defines Call Setup Rules that the device runs at call setup for LDAP-
based routing and other advanced routing logic requirements including
manipulation.
[ CallSetupRules ]
FORMAT CallSetupRules_Index = CallSetupRules_RulesSetID,
CallSetupRules_AttributesToQuery, CallSetupRules_AttributesToGet,
CallSetupRules_RowRole, CallSetupRules_Condition,
CallSetupRules_ActionSubject, CallSetupRules_ActionType,
CallSetupRules_ActionValue;
[ \CallSetupRules ]
For a description of the table, see ''Configuring Call Setup Rules'' on
page 287.
58.14.5 HTTP-based Services
The HTTP-based service parameters are described in the table below.
Table 58-79: HTTP-based Service Parameters
Parameter Description
HTTP Remote Services
[HTTPRemoteServices]
Defines HTTP-based services.
The format of the ini file table parameter is as follows:
[HTTPRemoteServices]
FORMAT HTTPRemoteServices_Index =
HTTPRemoteServices_Name, HTTPRemoteServices_Path,
HTTPRemoteServices_HTTPType, HTTPRemoteServices_Policy,

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English