EasyManuals Logo
Home>AudioCodes>Gateway>Mediant 3000

AudioCodes Mediant 3000 User Manual

AudioCodes Mediant 3000
1070 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #510 background imageLoading...
Page #510 background image
User's Manual 510 Document #: LTRT-89730
Mediant 3000
25.4 Configuring a Gateway Routing Policy Rule
The Gateway Routing Policy table lets you edit the default Gateway Routing Policy rule.
The Routing Policy is used for Gateway call routing and defines the following:
LDAP server (LDAP Server Group) for LDAP-based call routing (LDAP and/or Call
Setup Rules queries). LDAP-based routing is applicable to Tel-to-IP routing
(''Configuring Tel-to-IP Routing Rules'' on page
496) and IP-to-Tel routing
(''Configuring IP-to-<trunkgroupM3K> Routing Rules'' on page 505).
Enables Least Cost Routing (LCR), and defines default call cost (highest or lowest)
and average call duration for Tel-to-IP routing rules that are not assigned LCR Cost
Groups. The default call cost determines whether matched routing rules that are not
assigned a Cost Group are considered as a higher or lower cost route compared to
other matching routing rules that are assigned Cost Groups. If you disable LCR, the
device ignores the Cost Groups assigned to Tel-to-IP routing rules in the Tel-to-IP
Routing table. LCR is applicable only to Tel-to-IP routing.
The following procedure describes how to configure Gateway Routing Policy rules through
the Web interface. You can also configure it through ini file (GwRoutingPolicy).
To edit the Gateway Routing Policy rule:
1. Open the Gateway Routing Policy table (Configuration tab > VoIP menu > Gateway
> Routing > Gateway Routing Policy).
2. Click Add; the following dialog box appears:
Figure 25-5: Gateway Routing Policy Table - Edit Row Dialog Box
3. Configure the Gateway Routing Policy rule according to the parameters described in
the table below.
4. Click Add.
Table 25-5: Gateway Routing Policy Table Parameter Descriptions
Parameter Description
Index
[GwRoutingPolicy_Index]
(Read-only) Displays the index number of the table row.
Name
[GWRoutingPolicy_Name
]
Defines an arbitrary name to easily identify the row.
The default value is "GwRoutingPolicy".
LDAP Servers Group
Assigns an LDAP Server Group to the Routing Policy. IP-to-Tel and Tel-

Table of Contents

Other manuals for AudioCodes Mediant 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 3000 and is the answer not in the manual?

AudioCodes Mediant 3000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 3000
CategoryGateway
LanguageEnglish

Related product manuals